PearTune MSO 3.0 für Haibike Flyon TQ 120 ID: 3462-467

PearTune MSO 3.0 for Haibike FLYON / TQ
A high-quality tuning tool especially for e-bikes with Haibike FLYON drive systems. The FLYON motors were developed by Haibike in cooperation with the technology supplier TQ. The drives are considered extremely powerful and were designed for use in eMountain bikes. The enormous power has so far only been limited by the 25 km/h speed limit.
With the PearTune MSO for FLYON you can change that and finally use the full potential of the motor. It is a microcontroller-based tuning module that completely removes the 25 km/h speed limit. "MSO" therefore means nothing other than "Max Speed Off"! If you want to determine for yourself in the future how fast you drive with your FLYON motor-assisted, this tuning tool is an optimal solution!
Other advantages of the PearTune MSO for FLYON:
Correct speed display
Even when tuning is active, the e-bike display shows the correct speed (no halved values, as with some other tuning tools). Maximum and average speed are also displayed correctly. Only at the distance can the readout values be a little lower than in reality.
Easy installation
The PearTune MSO is a tuning module that must be permanently installed on the engine. Thanks to the "plug & play" principle and the use of original connectors, installation is easy. The PearTune module is simply connected between the magnetic speed sensor and the motor as well as between the display and the motor.
After installation, the module configures itself and adjusts to the respective e-bike - this runs fully automatically, a PC or smartphone is NOT required.
The PearTune MSO does not require its own battery, as it is powered by the display connection.
Due to the use of original connectors, the tuning module can be easily removed if necessary. After that, the e-bike is back in its original condition.
Can be switched
on and off at any time
After installation, you can turn the tuning on and off at any time with the light button: Light on = Tuning activated / Light off – Tuning deactivated.
Tip: If you want to turn on the tuning but drive without the lights on, you can alternatively activate the tuning module with the key combination + - + -.
After activation / deactivation, the e-bike display briefly shows the value "9.9" (tuning activated) or "2.5" (tuning deactivated). This will tell you if the tuning has been turned on or not.